Friday, September 8, 2017

Replacing the Tile Vanity Top on A Budget - Bathroom Renovation

      As I mentioned in my previous entry, my husband and I finally finished our guest bathroom renovation! When we purchased our home last year, the bathroom was ugly and very outdated. Now, I really love this bathroom which has clean and modern look. :) 

     These are my previous entries related to our bathroom renovation.

Before & After Painting All Cabinets (August 2016)

Shower Tile and Bathtub Paints (February 2017) 

Before and After Master Bathroom - New Shower Handles, Tub Spout And Shower Heads (March 2017)

Before and After - Guest Bathroom (September 2017)


 
Replacing Tile Vanity Top
     When we purchased this home, we decided to renovate our home on a budget. After painting the vanity cabinet white, we wanted to replace the old vanity top which had 80s pinky beige tiles! At first, we were planning on replacing it to a new granite vanity top. However, we noticed that the vanity was not standard sized, and a custom granite vanity top is very expensive. That's why we decided to make porcelain tile vanity top. :)   
May 2017

      Four months ago, he removed old tiles. Removing tiles was really dusty, so he wore a N95 mask and safety goggles.



     Then, he installed the backerboard.


       We went to Floor & Decor to purchase tiles. We looked for high gloss tiles which are easier to clean and perfect for bathroom. We wanted to get stone-looked porcelain tiles.

       These porcelain tiles looked like natural stone! 
Tarsus Almond Polished Porcelain Tile

Tarsus Gray Polished Porcelain Tile

     We finally decided to purchase the Carrara Polished Porcelain Tiles because we wanted to make our bathroom looked clean and brighter.  The Carrara Polished Porcelain Tiles had paired pieces. We purchased four 12 x 12 inch tiles, a 12 x 24 inch one, a 24 x 24 inch one and some 3 x 12 inch ones.  
Carrara Polished Porcelain Tile



      He finally installed the Carrara Polished Porcelain Tiles. He used Kobalt 24-in Snap Cutter for cutting a large tiles, and Goldblatt G02009 Compound Tile Nippers and Hitachi G12SR4 6.2-Amp 4-1/2-Inch Angle Grinder for cutting the round shaped hole for a sink.

       For its grout, he used Fusion Pro Single Component Grout Bright White.


      Even though tile vanity top is not trendy right now, I think that this white vanity top has modern look. I really love this vanity top, which is very beautiful and easy to clean indeed. I think that he did a really great job! Actually, we are thinking about installing the same tiles in our master bathroom as well. :) 

     Next time, I'll write about the floor tiles in this bathroom.




     These are my entries related to our bathroom renovation.

Before & After Painting All Cabinets (August 2016)

Shower Tile and Bathtub Paints (February 2017) 

Before and After Master Bathroom - New Shower Handles, Tub Spout And Shower Heads (March 2017)

Before and After - Guest Bathroom (September 2017)

Replacing the Tile Vanity Top on A Budget - Bathroom Renovation (September 2017)

Installing Bathroom Floor Tiles - Our Bathroom Renovation (September 2017)

New Bathroom Sink, Faucet, Toilet, Towel Bar and Paint - Bathroom Renovation




     These are my entries you might like.

Before and After Master Bathroom - New Shower Handles, Tub Spout And Shower Heads

Shower Tile and Bathtub Paints 

Before and After Door Hardware - From Door Knob to Door Lever

Before & After Painting All Cabinets

How to Install New Outlet Cover Plate - Hubbell Taymac Revive Decorator Wall Plate Review

How to Install A Spring Door Stop

Before and After Kitchen Flooring - Easy and Affordable Peel-And-Stick Vinyl Flooring! 

Built-in Trash Cans - Before and After


      My entries related to home renovations can be seen here.

      My entries related to bathroom renovations can be seen here.





1 comment:

  1. Great job! Kudos! You are inspiring me to do the same for my bathrooms.

    ReplyDelete